Cheap pool maintenance and other swimming pool tips are the most widespread topics among pool owners. And you’d probably love to learn how to save a few bucks while keeping your pool healthy, so you can always count on it as a place to relieve yourself and remove any accumulated stress.
This article will show you some tricks that will help you save money without having to exclude some essential pool maintenance stuff and therefore put the quality of your pool into question.
1. Be Careful How You Store Your Vacuum Head
From time to time you’ll have to replace the head part of your pool vacuum, even if you own the best pool vacuum available because the brushes on the bottom have flattened or fallen off. To avoid this, store the pool vacuum head upside down and keep it away from the sun. When the winter comes and the temperature drops, keep it away from chlorine. This should keep it in a good shape for a longer period of time.
2. Solar Pool Heater Cover Is A Good Investment
Using a solar cover will not only prevent debris and insects from falling in and slow down the temperature falling; it will also attract the heat from the sun. This way you’ll keep the heat trapped inside even if the temperature is low during the night. Just heat the pool to the desired temperature using your pool heaters and place the solar pool cover on.
You could also use a liquid solar blanket. Simple to use and will do the trick short term.
3. Baking Soda As Alkalinity Substitute
Baking soda is known as a good substitute for alkaline, but it may not be the case. You should check the prices and compare them; some alkalinity increasers may not be much more expensive. Also, alkalinity increaser doesn’t produce cloudy water like baking soda does so don’t put too much baking soda inside your pool, but it will do the trick.
4. Close Above Ground Pool By Yourself
Closing above ground pool may be quite an expensive investment, so learning how to do it by yourself will save you some money, and here are steps how to do it:
- Start by adding closing chemicals to the water
- Drain the pool until it reaches 6 to 8 inches under the skimmer
- Remove the hoses connected to the pool filter and the pool pump
- Remove all the drain plugs from the pump and filter
- Store them somewhere safe
- Install a winter plug in the return line
- Blow the air pillow up and take it to the middle.
- Wrap the cover over the pool, and then add the cables or winter cover clips to secure it.
- Place water bags so they hold the cover
5. Clean The Pool Cover During The Winter
To avoid any possible problems the rain or melting snow could cause, you should always clean the pool cover during the winter. Use the pool cover pump to remove the water from the top of the cover. Once it is dry, remove any debris using a broom or anything similar. This way you won’t have to worry about replacing it for the next year, and it is much easier to remove it when the time comes.
6. Limit The Filter Usage In Mild Climates
With the warm temperature outside it also rises inside the pool, which makes your swimming place an algae friendly environment. To get rid of the algae, you should run your pool at least 10 hours a day. Lower temperatures, on the other hand, are not a perfect place for algae, so you won’t have to use the pool filter as much as you’d have to during the summer. Feel free to limit the using time to 6 hours a day.
7. Check For Pool Chemical Spring Discounts
As spring draws near, the vast majority of pool owners are starting to get ready for springtime and higher temperatures. That’s why many pool equipment stores offer discounts to attract people. Use this opportunity and buy the chemicals in bulk. Do the math, calculate how much you’ll need it, and get enough chlorine and shock chemicals to last for the whole summer.
8. Avoid Using The Pool Pump During The Day
Check when the peak hours for your local area are when it comes to electricity. If you plan your activities wisely, you’ll be saving lots of money on your electricity bills by using the pool pumps during peak hours.
9. Shocking The Pool
Once you find the routine, stick to it! Changing it and skipping just one shocking may cause the formation of algae and cloudy waters. If you have found the rhythm that works great for your pool, that keeps your water crystal clear and pool test kit results are perfect, do your best to stick to that routine as much as you can.
If you change it, and the pool has been used in the period between two shocks, you may have to use the triple dosage of the regular one, and besides that, you’ll have to keep the filter system running all day for a few days.
For most pools shocking it every week is enough, it will remove any unwanted stuff and keep it healthy, your water clear and make your summer flows without any negative surprises.
10. Robots To The Cleaning Rescue!
If you don’t have enough time to clean your pool, or would simply love to have a helping hand, you may find a robotic pool cleaner. They work without electricity and will clean your swimming pool faster than you. They have the ability to climb up against the walls and stairs, so any debris or dirt will be collected.
Their filter bags also serve as water filters, and while they won’t be able to replace your pool pump and filter, they can help by allowing you to turn them off while your robotic cleaner is inside your pool, saving you the money you’ll be spending on electricity this way.
11. Check The Chlorine Stabilizer Level
The chlorine stabilizer is the type of acid that serves to protect the sun from removing all the chlorine from your pool. It is also known as cyanuric acid. The chlorine, when added solely to the swimming pool (via chlorine tablets or shock, doesn’t matter), is mostly unstable. This means it won’t last long when it faces the bacteria and other stuff that made you put it inside in the first place. And it is also quickly removed from the water by the sun.
Chlorine stabilizer will, as the name states by itself, helps stabilizing it, this way keeping it inside your pool for a longer period of time, so it can fight the bacteria longer. Besides that, chlorine stabilizer serves to prevent the sun from removing it from the pool during the evaporation.
12. Don’t Waste Any Pool Water
Remember, you’ll pay for water! That’s why it is important to learn how to keep it, while it is also important to learn how to limit the usage because it is not an infinite and unlimited resource. That is why it is a good idea to help preserve it by limiting waste.
When we speak about the ways it is being wasted, there are four most common:
- Evaporation due to heat and sun exposure
- Filter backwashing
It may not be noticeable at first, but after some time the water you’ve lost due to these four reasons may go up to hundreds of gallons. Take the calculator, multiply the price of a gallon with the amounts of water you’ve wasted and you’ll see it yourself.
How To Reduce The Water Wasting
By reducing the amount of wasted water you’ll reduce the water bills and lower the need to refill your pool, which could also lead to chemical changes and you’ll end up having to shock it or to add chlorine. Here is what you’ll have to do:
1. Lower The Pool Evaporation
You can’t see it, you can’t feel it, you can’t even completely stop it or prevent it and it could be one of the main problems you’ll face as a pool owner. If you don’t cover your pool, it could lose up to an inch of water weekly. When looking at annual water evaporation values, it could go from 7.000 gallons to 25.000 gallons, depending on the size of the pool.
To prevent it from reaching a critical level, always cover your pool when you’re not using it. You don’t have to place full cover every time you’re done swimming, just use the simplest solar one and it will keep the water inside. If there is a pool heater, try to use it as little as possible.
Also, another thing that affects the evaporation process and speeds it up is the wind, so it is recommended to place anything that could block it from flowing around the pool. Anything will do – pool fence, boulders, basically whatever you think of will help with preventing the wind from flowing over the water and debris from reaching it.
2. Check For Pool And Filter Leaks
The second problem that could lead to the loss of water is water leaking. Some statistics claim that about 30% of pools around the world have this problem. Not every leaking is severe, most of them are quite small and can be fixed easily, which is exactly what you should do as soon as possible.
How to check if there is a leak if you can’t spot it? Just use a grease pencil to make a mark on the water level at the skimmer. Leave it for a day, and then check it after 24 hours. If the water has dropped more than normal, you leak.
Once you spot it, call for professionals without hesitation or read our guide on how to fix the leak. Sometimes it may come at a price, but once you make it work again and resolve the problem, it will save you a lot more money in the long run, not to mention the fact that you’ll prevent any other bigger and more problematic damage that could occur.
3. Beware Of The Splash
Although one of the signs you’re having a good time, too much splashing could lead to some serious headaches afterward. Of course, you don’t have to bite your fingernails for every dip of the water that reached the outside of the pool, but it is recommended to take some measures.
Start by avoiding or if that is not possible at least changing or limiting any water games that include lots of splashing. Also, make sure that fountains or any other add-ons don’t cause any extra splash. If you don’t use the pool, turn them off. And if you have kids who love to play water basketball, then keep the water level just above the minimum – it will help.
4. Avoid Backwashing Filters If Not Needed
Backwashing the sand filter for about two minutes means the pool will lose around 200 gallons of water, so it is recommended to pay a bit more attention to it so you don’t waste more water than necessary.
For the beginning, don’t backwash the filters for longer than those two minutes if not necessary. Once you see in the sight glass that the water is crystal clear, turn it off. You could also affect the need to backwash it with proper pool and filter system cleaning. Remember, the filter serves to remove any filth from your pool, so whatever you don’t remove using your pool cleaning tools will end up going through it and you’ll have to backwash it more often. Just maintain your pool regularly and you’ll be OK.
Globo Surf Overview
This article will help you achieve cheap pool maintenance, while also keeping your pool healthy and usable all the time. Following swimming pool tips is not hard and complicated; it will ease the process while allowing you to save some money without having to give up the enjoyment.