How To Use Jigs And Spoons For Vertical Fishing


Both fishing beginners and experts find vertical jigging incredibly useful when they are fishing near or on the bottom. It is also an ideal technique for anglers who go after suspended fish in the open waters.

If you do enjoy ice fishing, learning how to use jigs for vertical fishing is something you shouldn’t ignore. In fishing spots where game fish are in schools or bunched up, you may find a lot of success if you already know how to jig. In this article, we will focus on showing you how to use jigs so that you can take home largemouth bass, spotted bass, white bass, crappies, and other fish species every time you put your best fishing shirt on.

Selecting the Right Equipment 

Vertical jigging can be accomplished using either metal spoons or lead head jigs. In this section, we will make it much easier for you to get the right equipment so that you can succeed at vertical jigging.

Get a Heavy-Duty Fishing Rod 

For vertical jigging, you need to invest in either an extra-heavy action or heavy action jigging rod. A stronger rod will have the ability to handle large fishes. If your fishing line happens to get caught in a heavy corner, the saltwater fishing rod will have the ability to hold up. Before paying for a jig fishing rod, make sure that it is sturdy enough.

Use a Sturdy Fishing Line 

The best fishing line for jig fishing should have the ability to withstand a lot of strain without breaking. You should invest in a heavy braided line of at least 50 pounds.

Heavier lines won’t stretch. This makes things much easier for you when you are pulling up bigger fish. A sturdier line will also have the ability to stand up to a thick cover if it happens to get stuck.

Invest in Realistic-Looking Jigs

The fish you are going after will only be willing to take the bait if the jig is appealing enough. For this reason, you should make sure that the jig resembles the prey that your target fish would go after.

You can find jigs in a wide variety of shapes, colors, and sizes. When getting started with vertical jigging, you can invest in different jigs. You can experiment with the jigs in different types of covers and water temperatures. Below, we have outlined the most common types of jigs:

  • Swim Jig – Swim jigs feature a bullet-shaped head and a light weed guard. Their weight ranges from 0.25 to 0.5 ounces. Swim jigs are usually moving when the fish bites. They, therefore, don’t need heavy hooks.
  • Casting Jigs – These jigs have a round, flat bottom, or Arkie style head. The flat bottom helps them stand off the sea bed. They do include a medium-strength wire or standard weed guard. They weigh between 3/8 and 0.5 ounces.
  • Flipping Jig – These are ideal for fishing in heavy brush or wood. They weigh approximately 3/8 to 1 ounce. They feature a stout, heavy-gauge hook. When compared to other jigs, the flipping jig is firmer.
  • Grass Jig – The grass jig weight ranges between 0.25 ounces and 1.5 ounces. They feature a conical head and a line tie close to the top. This makes it possible for the jigs to penetrate the grass easily.
  • Football Jig – These are ideal for rocky bottoms. Their pigskin-shaped head makes it possible for them to roll over the rocks without ending up in the cracks. The weight of these types of jigs ranges between 3/8 ounces to 1 ounce.
  • Finesse Jig – These are ideal for spaces that feature smaller fish, cold waters, and heavy angler pressure. Their weight ranges between 3/16 ounces to 0.25 ounces. They feature finesse or spider cut skirts and finesse light wire hooks.

One of the caveats in using the soft-plastic bodies usually attached to the above jigs is that their tail has to be active whenever you move the lure up and down. Another important caveat is that they have to avoid tangling onto your hook point, skank, or the jig head itself.

When compared to the spoons used for cast-and-retrieve fishing or for trolling, the metal spoons used for jigging are very different. They are usually cylindrical, compact, and slab-sided. The fact that they are heavy makes it possible for them to sink pretty quickly.

When using both the lead head jigs and metal spoons, you can either decide to fish close to the sea bed or at a particular depth. Ensuring that the lure stays as close as possible to directly below helps with hook setting and strike detection. It also helps you avoid hang-ups.

How to Use Jigs


Assuming that you have already invested in the best fishing reel and you are in the process of acquiring the fishing accessories mentioned above, we will go ahead and show you how to jig. The steps outlined below are ideal for catching bass fish and other fish species.

1. Setting Up the Fishing Rod 

Place your hand at the base of the reel when holding the fishing rod. Leave approximately 30 cm (12 inches) of line hanging between the rod tip and the bait hook. Using your index finger, grab the line, and keep it taut.

2. Cast the Line 

Before casting the line, look around. Ensure that there is nothing that the line can catch onto. Aim your line towards the spot where you want it to land and then pull it backward. After casting the line, release the index finger from the fishing line.

3. Allow the Jig Hook to Hit the Bottom 

After casting the spinning fishing rod, you will need to wait a couple of seconds. This is to give the hook time to hit the bottom. If your bait is heavy enough, you should feel the metal spoon hit the sea bed. It is worth noting that the lighter the jig hook, the longer it will take before hitting the bottom.

4. Snap and Then Pop the Line 

Make some boisterous vertical motions. To achieve this, you will need to flick your wrist and also pop the fishing rod tip up for a small distance. Next, allow your jig hook to sink back to the sea bed.

Repeat the above process a couple of times. This should attract the attention of larger fish who are exploring your favorite deep-sea fishing spot looking for something to eat. Vary the movements by jigging the rod side-to-side and up and down.

5. Take Advantage of the Swimming Technique

When learning how to use jigs, you should avoid ignoring the swimming technique. For this technique to work, you will need to cast the fishing line into the water and then hold your rod at a sixty-degree angle. Next, reel your fishing line in.

This motion will cause the line to flow smoothly through the water. Its motion will mimic swimming.

Reeling in Your Catch 

Now that you know how to jig, the next thing you need to know is how to reel in your catch. Knowing how to use jigs won’t be useful if you do not know how to get your fish out of the water after catching it.

1. Pay Attention to the Fishing Line 

When jigging vertically, you will need to keep a close eye on your braided fishing line while it is still under the water. When a fish takes the bait, you should see the line jolt on the water surface. You need to watch out for this movement. In some instances, the movement may not be jarring enough for it to be felt all the way through the fishing rod and line.

2. Hold onto Your Rod Tightly 

After a big fish realizes that whatever it bit into was not a vulnerable prey, it will definitely try to swim away. Big fish do put a lot of pressure on the line as they try to break free and getaway.

After the fish has gone for the bait, lower the rod to a 45-degree angle, and then hold on tightly. Stay in position and wait for the fish to give up on pulling the line.

3. Pull Your Fish in 

Still holding your fishing line steady, start pulling the fish fishing rod up as if your goal is to form a 90-degree angle. Next, lower the rod back to the 45-degree angle and start engaging the reel.

Start pulling your catch in. You can repeat the raising, lowering, and reeling-in pattern until you bring your catch in.

Globo Surf Overview 

Knowing how to use jigs is incredibly important considering that this fishing method can be useful in a wide range of fishing scenarios. If you know how to jig, you should be able to reel in fish when ice fishing, deep-sea fishing, and even when you decide to go after the bass fish.

Knowing how to use jigs won’t be very useful if you do not have the right tools. Investing in the right tools before learning how to jig will make it possible for you to succeed.

More Fishing Reviews:

Globo Surf
My name is David Hamburg. I am an avid water sports fan who enjoys paddle boarding, surfing, scuba diving, and kite surfing. Anything with a board or chance I can get in the water I love! I am such a big fan I decided to start this website to review all my favorite products and some others. Hope you enjoy!