With water rates steadily on the rise, many hot tub owners are actually looking for ways to cut down on the costs associated with operating a hot tub. One way of doing this is by buying an energy-efficient hot tub. This way you don’t have to keep worrying about questions like “how much does it cost to run a hot tub” or “how much electricity does a hot tub use” (although knowing the answers can give you an idea of just how much you’ll be able to save when you use a more energy-efficient hot tub). However, for hot tub owners who still have older models or improperly installed tubs, don’t worry because there are ways for you to cut down on the operating costs of your beloved hot tub.
Fix Those Leaks
When you buy a new hot tub, you know that it is well insulated with spray foam insulation which traps heat in the air bubbles in them. However, if you leak somewhere in the hot tub and its plumbing system, the foam starts to absorb water until such a time that it becomes water-logged. When this happens, the insulation loses its effectiveness, which means that you’ll have to spend more money when heating your hot tub.
To prevent the foam insulation from becoming water-logged, you’ll need to check your hot tub and its plumbing system for leaks regularly and make it a part of your hot tub maintenance. Don’t ignore minor leaks as well since even those small droplets of water can add up to a significant amount of water over time. Also, after you’ve fixed the leaks, it would be a good idea to have the wet insulation replaced with new ones by a qualified technician.
Get a New Hot Tub Cover
Hot tub covers also have the same foam insulation that is used in the hot tub itself. Concerning hot tub covers, the foam is usually covered with a plastic barrier which prevents it from absorbing the water and moisture from the hot tub. Unfortunately, even the best plastic or vapor barrier will wear out over time, which then means that at some point water will be able to penetrate through the foam insulation in the hot tub cover.
Needless to say, the wet foam insulation in hot tub covers are just as ineffective as the wet foam insulation in the hot tub itself. So when you feel that your hot tub cover is heavier than usual, you’ll want to check the foam insulation since this may mean that it’s already water-logged. When it is, then you’ll want to consider getting a new hot tub cover.
Program Your Filtration for Efficiency
All hot tubs have a filtration system as this component is crucial in ensuring the hot tub’s water is clean and free from contaminants. For the filters to work, you need to turn on the pump so that it cycles the water through the filter so that the water comes out safe and clear. More often than not, you’ll need to do this for a few hours in a day (if you use your hot tub extensively), and that alone can consume a significant amount of electricity which will eventually show up in your bill.
That said, one of the easiest ways to cut down on your hot tub’s electricity consumption is by programming its filtration cycles. Many of the latest hot tub models provide the hot tub owner with a way of controlling their filtration cycles. Information about how to do this should be available in the owner’s manual or the manufacturer’s website.
Once you’ve figured out how to program your hot tub’s filtration cycles, you can now set them to run less during the off-peak hours and on days when you don’t use the hot tub. You’ll want to do this because during those times, fewer contaminants are introduced into the water and so fewer contaminants need to be filtered. This way, your hot tub consumes less power but is still able to maintain an acceptable level of water cleanliness and clarity.
Using Economy Mode
There will be times when you won’t be using your hot tub for quite a while like when you’re going on a vacation or during the winter months. During such times, you’ll want to put your hot tub’s settings into “economy” mode (hot tubs are generally set to the default “standard” mode). In this mode, the hot tub still heats the water in the tub but does so in a way that it only heats the water during the scheduled filtration times.
All in all, putting your hot tub in economy mode allows you to save on your electricity bills because you’re minimizing the use of the hot tub heater.
Clean or Replace the Filters
As mentioned earlier, filters are important in keeping your hot tub water clean and safe. When the filter gets dirty, it loses its effectiveness. Some may think that the effect of this may only be about the water’s cleanliness; however, a dirty filter can also affect how much electricity your hot tub will consume.
When hot tub filters accumulate enough amounts of contaminants and debris, they become clogged. When this happens, water won’t be able to pass freely through the filter. That said, the pumps will have to work harder in ‘pushing’ the water through the filter, and you will observe that you’ll need to run the pumps longer as well (which of course means higher electricity bills).
For this reason, you’ll have to make it a point to clean your hot tub filters regularly. If the hot tub filter isn’t that dirty, washing it with running water should be more than enough to get any dirt out. However, if you see the grime on the filter (which is usually caused by all the suntan lotion and dead skin cells on the water), you may need to soak the filter in warm water and mild detergent to remove the grime buildup. Also, keep in mind that your hot tub filter will wear out over time, so you’ll want to replace it at least once a year.
Globo Surf Overview
As you can see, there are several ways that you can make your hot tub more energy-efficient and save money on your electricity bills. By employing the tips mentioned above, you can enjoy using your hot tub without worrying about how much it’s costing you. And if any of your friends ask you “how much does it cost to run a hot tub” and “how much electricity does a hot tub use” and are worried about the expenses, then, by all means, point them to this article. They’ll surely thank you for doing so.