Fluke Fishing Guide: How To Fish Flukes


Flukes are one of the most popular and fun soft plastic baits around the world, and they will provide you lots and lots of action, especially during spring and summer days. In this article, we’ll go through some of the most important fluke features, and you’ll get the chance to learn how, when, and where it is best to use them.

What Makes Fluke Great

Flukes owe their popularity to the fact that they are so attractive that not many fish species could resist. This means both small and big fish will bite if you use flukes. Another important thing is the fact that they work well under any weather conditions.

Fluke Fishing Gear

You don’t have to think about the gear quality because you don’t need the high-quality gear to get the most out of it, but one thing you should pay attention to is a drag. Just make sure it works properly. When it comes to the rest of the gear, here is what you’ll need for fluke fishing:

Rod And Reel Combo

If you’re a newbie, go with the spinning rod and spinning reel when fishing a fluke. A spinning tackle will allow you to skip the lure further. If you’re not a newbie and have your own preference and fishing rod and reel combination that works for you, then stick to it. The most important thing is that you feel comfortable while you fish.

Two things you should pay attention to are the sensitivity and the strength of the rod if you’ll be casting fluke far away from your sight. The stronger the better, especially if you run into some monster that loves to put on a fight.

Fluke Fishing Hook

This solely depends on what you’ll be chasing. If you’d be fishing for a smaller fish, then don’t worry and use any round bend hook, as it will provide you better hook up ratio and leverage, but if you’ll be chasing after something big, use the strongest hook you can find, to avoid it becoming straightened during the fight.

Making The Fluke Straight

Most often than not soft jerk baits are not straightened when purchased, which can be a problem for weightless fishing because they don’t track right so the bass won’t be lured to it. That’s why it is important to learn how to make it straight.

You’ll do it by placing it in hot water for between 15 and 20 minutes. Smaller flukes will need less time, while bigger ones will take about 20 minutes. Be careful, though, because if you leave it in hot water for more than 20 minutes, it may melt. Then, remove it from the water, place it on a dry towel to dry, and run your hands along the fluke to make it straight. Wait for it to dry and hook it.

Rigging A Fluke

The next part of our how to fish fluke guide is dedicated to rigging a fluke. Here is how to do it, step by step.

1.Hold the fluke upright in your left hand and the hook in your right hand. Open the fluke’s mouth and push the hook through, and then out through the centreline.

2. Slide the hook through into the underbelly while keeping everything aligned following the center of the fluke to ease up the balancing on the hook.

3. Flip it over and guide the hook through the fluke’s back. Cast it and let it sink.

Fluke Hooking Angles

Different hooking angles cause different fluke behavior. For instance, if you rig the hook near the underbelly, it will make a fluke looking like it’s moving upwards, and if you hook it near the tail, it will look like the fluke is diving further down. Try different variations until you find the one you’re completely comfortable with.

Adding Weight

When it comes to adding weight, there are a few options. Many angles put lead nails inside the fluke. Another option is to use a bell sinker or a swivel.

Best Areas For Fluke Fishing

Although you may use it anywhere and anytime, some places are a bit better for fluke fishing than others.

Shallow Grass Beds

Grass beds mean lots of fish hanging around, especially early in the morning or the late afternoon, when the fish are looking for a shelter. It is useful to learn where exactly the fish are because the grass may serve as a great hiding spot, so if you look for somewhere else, you may miss them.


In case it is windy outside, fish will probably go into deeper areas. On the other hand, when the weather is calm, you’ll find fish by the shoreline.


If you’re near the boat dock, check around for fishing pole holders or any sign there are other anglers. This also means that area is most likely rich with fish, so you may want to try it out. A good place to start is the space between two boats or the sides of the dock, but be careful and watch your line.

Any Fish Hideout

If there is some fish hideout you know of, feel free to try fluke. Most often, the effort will pay off soon enough.

How To Fish Flukes


There are many variations you could use flukes, but here we’ll go through the four most basic techniques that should work and bring you the best results. Remember, the key is to use the best lure at the right time, so in these four techniques, timing is crucial.

Cold Water Fluke Fishing

Although the outside temperature is slowly rising, the water temperature is still near the lower end of the thermometer in the vast majority of rivers, lakes, and ponds. This also means bass, as cold-blooded fish, will roam freely but lethargically. This makes a drop shot perfect for the occasion. Use fluke, set it up on a drop shot, and start working it slowly along the flats next to deep-water firstly, followed with area leading to spawning flat, and the result should be much fish in your bag. With this technique, you can’t be wrong and the lure will surely work like a charm, but the best way to do it is to cast it as long as possible, and then slowly but steadily moving the line back to the boat. This way has proven to be the most effective so far if you love easy to catch.

Texas Rig Tantalizer

Sometimes the conditions you’ll be fishing may become tough, most anglers will seek for fussy eaters, which may be one of the perfect words to describe bass during their spawn period. During this time food is not on top of the list of bass priorities, so you’ll have to be creative. Take your fluke and use the Texas rig. Add a small bullet-weight to the nose of the fluke and cast it that way. Ask around about the area where bass will go to spawn. What you should target are stumps, laydowns, debris, basically anything else that could serve as shelter and offer protection.

Bed Bombing Technique

Although the bed fishing technique causes lots of polarized opinions, it is still one of the more popular among people, when the chance to use it shows up. What you’ll need is one bag filled with white, albino flukes, a few drop shot hooks, and a pack of nail weights. Use one of the nails and place it into the nose of one of the flukes, but make sure the whole nail weight is inside the fluke’s body with only the head showing outside. Take the point of the hook and lead it through the backside of the lure, just before the tail, and allow it to exit so you end up with the exposed hook.

When you cast the lure in the water, twitch it easily while it stays in place with its nose down. This way bass will think bluegill came to eat, which will annoy the bass enough to try to chase it away and bite.

Weightless Dynamo

Weightless fishing is a technique that will let fluke behave completely freely, so it can easily dart, spiral, move left, right, basically anyway imaginable, caused by twitch-twitch-pause-retrieve sequence. Not many options have shown better results in post-spawn bass fishing, no matter where anglers are or what they are trying to find.

Move your boat along the major lake points, near the area where bass will move to spend their summer time. The goal is to intercept bass as it moves to its hideout. When the shad start to spawn near the riprap banks, use weightless fluke right up the cover, wait until it sinks, and then as aggressive as you can switch it back to the boat. The most probable outcome is it being attacked rather sooner than later.

Globo Surf Overview

For a successful fishing trip, you’ll have to learn how fish behave and what they love. Once you learn this, it will be way easier to understand what needs to be done to catch it. Using fluke is one of the most fun and most effective ways to do it as, if used properly, fluke will act much like live bait and will be a really attractive bite for many fish species.

They are not so popular among fishermen all around the world without the reason, so you can’t be wrong if you opt for flukes. What you have to do is to find the best fishing location, and with this article using fluke should be one of the most pleasurable and memorable fishing trips you’ll have in a long, long time.

More Fishing Reviews:

Globo Surf
My name is David Hamburg. I am an avid water sports fan who enjoys paddle boarding, surfing, scuba diving, and kite surfing. Anything with a board or chance I can get in the water I love! I am such a big fan I decided to start this website to review all my favorite products and some others. Hope you enjoy!