After hooking up a fish, your fishing knot can make all the difference between dropping or landing the catch. Having the right knot will make reeling in the catch easier for you.
The growing popularity of the braided fishing line has increased the need for reliable and stronger knots that can be used with the fishing line. Most of the knots that are strong with the monofilament line are generally not good fishing knots for braided line.
If you have recently switched from monofilament to braided line and are wondering which fishing knots you should use, this article is for you. We will be showing you how to tie a braided fishing line.
How to Make Fishing Knots for Braided Line Strong
The monofilament lines feature a bite that allows them to lock the knots in place more easily. Braid lines tend to be more slippery. When not tied properly, the fishing knots for the braided line tend to fail under pressure.
Fortunately, there are tricks you can use when tying the fishing knots for the braided line to reduce the slippage. We have outlined the tips below:
- Before tying the knot, run the braided line through the hook eye at least twice. This will create an additional friction point.
- Double the wrap number. Using twice the number of wraps you would use on a monofilament line adds friction without adding too much bulk to the knot.
- Before tightening, wet the knots. This will lubricate the knot, making sure the wraps fall into place. This creates a much better set after applying tension.
- Test the knots. After tying the fishing knots for the braided line, give them a solid tug to test the strength and also set the knot. If there are any flaws in your knots, you will know about them before beginning your fishing trip.
How to Tie Braided Fishing Line – the Top 5 Knots to Use
1. Uni Knot
This multi-purpose fishing knot makes it possible for you to tire a lure, swivel, or hook directly to the braided fishing line. In function, the Uni knot is a noose-style knot. It slides down your main fishing line and then cinches tightly against the eye of your catfish hook. To learn how to tie braided fishing line using the Uni knot, follow the instructions below:
Run the fishing line through the hook eye and then double back parallel to your standing fishing line. Form a loop by laying your tag end over the doubled fishing line.
Make 6 turns with your tag end around the double line and then through the loop.
Moisten both lines and then pull the tag end to snug-up your turns.
Note: Running the fishing line through the hook eye twice and using ten wraps instead of 6 will improve the knot when you are fishing with braid.
2. Palomar Knot
The Palomar knot is one of the easiest to tie fishing knots for braided line. Unlike the Uni knot, you won’t need to use tweaks to optimize the functionality of the Palomar knot. The knot gives you 2 strands through the hook’s eye automatically.
Additionally, the knot features a lot of friction points. This minimizes slipping. The steps below show you how to tie the Palomar knot:
Double about 6 inches of fishing line and pass the end of the loop through the hook eye.
With the hook hanging from the bottom, tie a loose overhand knot.
Holding the overhand knot between your forefinger and thumb, pass the loop of the line over the hook. Slide the loop above the hook eye.
Tighten the knot by pulling on the tag end and the standing line. Next, clip the tag end.
3. Trilene Knot
Also known as the Two Turn Clinch Knot, the Trilene fishing knot is ideal for braided fishing lines. You can use the knot with your saltwater fishing rod to land huge saltwater game fishes. To tie the knot, you will just need to follow the steps below:
Slide the braided fishing line through the hook eye. Repeat, entering your line from the same direction while ensuring you form a double loop at the hook’s eye.
Wrap the line’s tag end around your standing line 4 – 5 times while moving away from the hook.
When using the braided line, you can improve the Trilene knot by making use of 10 wraps instead of 5.
Pass the tag end back through your double loop at the eye, moisten, and then pull your knot tight against the eye. Finally, trim the tag.
4. Double Uni Knot
If you have already mastered how to tie braided fishing line using the Uni knot, mastering the Double Uni Knot should be easy. This knot allows anglers to connect lines of varying diameters. If you are planning a night fishing trip, follow the steps below to tie the Double Uni Knot:
Overlap the ends of the fishing lines you intend to join. Take the end of the line on your left and double back. Make about 3 to 4 wraps around the 2 lines and through the formed loop. Tighten by pulling the tag end.
Repeat with the end of the line on your right. For the braided line, double the wrap number.
Pull your standing lines in the opposite directions to slide your 2 knots together. Clip the ends close to your knot.
5. Albright Knot
This is one of the fishing knots for braided lines allowing you to create a line-to-line connection. It is perfect for joining your braided line with other types of fishing lines. To learn how to tie braided fishing line using the Albright knot, follow the steps below:
On the heavier line, make a loop and run approximately 10 inches of your lighter line through the loop.
Hold the 3 lines between your index finger and thumb. Wrap your light fishing line back over itself and the 2 loop strands.
Make 10 wrapped turns. Make them tight. Feed the line tag end back through your loop and ensure it exits the loop from the same side it entered.
Hold the ends of your heavier lines and slide your wraps to the loop end. Tighten by pulling your lighter line. Clip the tag end close to the knot.
Globo Surf Overview
Some of the fishing knots which work on the monofilament lines may not work on your braided line. However, this does not mean that fishing knots for braided lines do not exist. This article has shown you how to tie braided fishing line using the top-rated braided line fishing knots. Understanding how to tie the knots correctly can help you avoid losing your catch.